Ask Experts Questions for FREE Help !
Ask
    juskriz's Avatar
    juskriz Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2010, 02:50 PM
    Brake caliper mounting bolts and bushing
    It's the caliper mounting bolts/bushing end that goes into the mounting arm (the metal part of the bolt/bushing) will not fit flush into the mounting arm
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Jan 23, 2010, 03:03 PM
    Where in this picture is it. Try and give me a number off the page. Click on the pdf file below. Top page is a 99 Camry 4 cylinder. Is this what you have?
    Brake caliper.pdf
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #3

    Jan 23, 2010, 03:10 PM

    If you mean the "sliding pin" that goes into the rubber boot, that goes into the caliper bracket,.
    If you can't twist it, or push it in and out, then it's seized. Those parts need replacing but I'll resort back to my original post to go get a reman caliper.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My camry brake caliper bushings will not go all the way in [ 2 Answers ]

I am replacing front right brake caliper on 99 camary the bushings metal end into mount will not go in flush

Brake pads and caliper for 93 accord [ 2 Answers ]

I am attempting (first time) to replace brake pads on the rear of my 93 honda accord. I got everything off and it seems pretty straight forward. My problem is I can get the caliper piston retracted. I have tried turning it with a pair of needle nose pliers and I have tried a big c-clamp. The...

Brake Caliper sticking [ 1 Answers ]

I have a 99 Lexus LX470. I returned home from a long trip and noticed a terrible scraping on the left rear rotor, even without the brakes applied. I took off the caliper and noticed the outer one was like new and the inner one was completely gone. I put new pads on and started to work the next day...

96 Quest Caliper bolts [ 1 Answers ]

How do I take the Caliper Bolts off the front of a 96 Quest? What size and what kind of tool?

Toilet leak at mounting bolts [ 4 Answers ]

I have a mid-80's Crane toilet. I can not get it to stop leaking from the two mounting bolts. I've tried replacing the washers & bolts, cleaning the porcelein with scouring pad, and even using plumbers putty. Nothing works! I've tried tightening and loosening the bolts. I'm at my wits end and...

View more questions Search