Ask Experts Questions for FREE Help !
Ask
    billyboblyons's Avatar
    billyboblyons Posts: 14, Reputation: 1
    New Member
    		  
    #1

    May 13, 2008, 10:45 AM
    96 Quest Caliper bolts
    How do I take the Caliper Bolts off the front of a 96 Quest? What size and what kind of tool?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    May 13, 2008, 11:59 AM
    Likely, use a 12 mm box-end wrench or 12 mm socket. Most import caliper bolts should be torqued to 25 lb.-ft. upon installation. Be sure to clean and coat caliper bolts with silicone grease, before reinstallation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Swinsuit quest. [ 2 Answers ]

I was wanting to by a swimsuit from this really nice website and like the problem is that the store that holds the right swimsuit top size is over seas and my mom says if I by it from this site that if I tried to return it I wouldn't get my money back the website is Bravissimo | Big Bras, Lingerie,...

How do I solve this math quest. [ 2 Answers ]

If 6 cartons of burgers & 5 cartons of bags cost $80.00 and 5 cartons of burgers & 6 cartons of bags cost $85.00, how much does 1 carton of bags cost? And how much does 1 carton of burgers cost? :confused:

2006 Honda Civic.Can't collapse brake caliper [ 3 Answers ]

I'm replacing the front brake pads on a 2006 Civic. I did the right side, no problem. When I tried to collapse the piston on the left side, it will not budge. Any ideas?

Brake fluid leak- master cylinder or caliper? [ 1 Answers ]

First, my Honda Accord is a 1987 and has seen about 300,000 miles. It is slowly leaking break fluid, because about every two weeks the brake light comes on and I have to put in more fluid. I have looked at it, and the front right caliper is damp with brake fluid so I am replacing that caliper. I am...

05 Impala caliper bolt [ 5 Answers ]

I'm replacing the rear brakes on my 05 Impala, and I have messed up bad. I took of the rotors to have them refaced, but when I went to put them back on, it seems that my caliper pins are 2 different types. One is smooth with the threads on the end, the other has a small rubber seal at the end of...

View more questions Search