Ask Experts Questions for FREE Help !
Ask
    dconstant's Avatar
    dconstant Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2010, 11:02 AM
    I have a heil furnace and replaced a skuttle spray type humidifier. After the install
    After installing a skuttle spray type humidifier and testing it o.k. I closed the panels and went to the thermostat to retest. When I call for heat from the thermostat, nothing happens. The blower fan won't even turn on.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 23, 2010, 12:17 PM
    Is possible you fried the transformer during the new install,, does anything work,, the ac maybe?
    dconstant's Avatar
    dconstant Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Jan 23, 2010, 01:10 PM
    The doesn't work either.
    dconstant's Avatar
    dconstant Posts: 6, Reputation: 1
    New Member
    		  
    #4

    Jan 23, 2010, 01:13 PM
    The ac doesn't work either.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #5

    Jan 23, 2010, 01:26 PM
    I would check the transformer for power output after checking to make sure there is power to the furnace, check all fuses and breakers
    dconstant's Avatar
    dconstant Posts: 6, Reputation: 1
    New Member
    		  
    #6

    Jan 23, 2010, 02:48 PM
    Transformer has 110 going in but 000 on the 24vac output side.
    dconstant's Avatar
    dconstant Posts: 6, Reputation: 1
    New Member
    		  
    #7

    Jan 23, 2010, 06:13 PM
    I don't understand why the blower (operates off 110vac) doesn't work. If the transformer is fried then only the 24vac side shouldn't work.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #8

    Jan 23, 2010, 06:45 PM

    24 volts tells the blower relay to work. Are you sure you got your humidistat wired right?
    dconstant's Avatar
    dconstant Posts: 6, Reputation: 1
    New Member
    		  
    #9

    Jan 23, 2010, 07:33 PM
    I replaced an old one with a new one and wired it the same.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil furnace schematic and directions for parts install [ 11 Answers ]

Where can I find a good schematic or diagram of the parts within a Heil furnace? Also, when purchasing parts, do they come with installation directions? I always want to try the initial install myself rather than paying for service calls first.

Install Humidifier on Lennox Pulse Furnace [ 11 Answers ]

I want to install a whole house humidifier in a home with a Lennox Pulse furnace (Model Number G2103-80-1.) There's a schematice on the unit. I don't think it has a provision to provide power to the humidifier only when the heat is running, but I wanted to make sure. This is a really nice...

Cutting a metal sheet to install a humidifier [ 2 Answers ]

I am installing an Aprilaire 700 series humidifier on my heating system. I have the template for the size of the opening on the supply duct. How do I cut the opening on the plenum and what tools do I need?

Humidifier install [ 1 Answers ]

I have a honeywell he360a humidifier that was purchased from homedepot that came with little or no help. How do you wire the humidifier

Furnace 3 amp fuse blows after install of honeywell HE360 humidifier [ 4 Answers ]

My wife's uncle installed a new honeywell HE360 humidifier and now the 3 amp fuse keeps blowing? I had a humidifier before and just installed a new onewhat could be the problem? Please help Thank you Larry

View more questions Search