Ask Experts Questions for FREE Help !
Ask
    wjeasy1's Avatar
    wjeasy1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2010, 08:11 AM
    Goodman furnaces schematics
    I have brand new goodman furnace that run all the time in heat mode, I disconnected the thermostat and it still run, I though the gas valve was stuck in open, I change that and it didn't work, my next thing was to change the board. Am I going the right dir
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 20, 2010, 10:34 AM
    Have you called the HVAC company that installed your unit? If the unit is new it is under warranty and they should fix it for you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnaces [ 6 Answers ]

I replaced the ignitor on my furnace. The ignitor will glow and the gas to the burners will come on and then the ignitor will go off and the gas at the burner dies out. Any suggestions?

Goodman Furnaces [ 1 Answers ]

How is the quality and performance of Goodman Furnaces. How is the quality of Goodman furnace model GMV95

Opinions needed on goodman furnaces [ 1 Answers ]

I am in need of a new furnace. I am considering Goodman vs York. I have not read a lot of good things with regards to Goodman, but most of what I read is almost 2 years old. I am also aware that a lot has to do with the installer. Every company I speak to tell me their furnace is the best. So,...

Goodman Furnaces [ 2 Answers ]

I am looking to replace my furnace/AC in the next couple of months. Goodman has been recommended to me by my furnace guy. In doing some research on the internet, it seems that they are not rated very high and have several repair issues. Any comments on the brand?

View more questions Search