Ask Experts Questions for FREE Help !
Ask
    drhharding's Avatar
    drhharding Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2010, 08:49 PM
    Coleman evcon just installed
    This unit is brand new just installed the burner lites the blower starts and then the burner shuts down.The code reads ignition failure. What should I look for
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 19, 2010, 09:17 PM
    A good tech that deals with mobile homes, if that's what you installed it in,, did you replace the roof jack/also if it's a mobile home
    drhharding's Avatar
    drhharding Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 20, 2010, 10:18 AM
    Quote Originally Posted by wmproop View Post
    a good tech that deals with mobile homes,,if thats what you installed it in,,,,,did you replace the roof jack/also if its a mobile home
    What else besides roof jack
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jan 20, 2010, 10:30 AM
    If the code reads you have ignition failure that is exactly what it means. Check and test the systems ignition. If it will not ignite then it will not burn. Contact the HVAC contractor that installed your unit since it is new. Most if not all the time the manufacturer will not warranty parts for you they have to be ordered through a coleman dealer who is your contractor.

    We cannot test your unit for you since you have to be there to do the testing. Sorry.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #5

    Jan 20, 2010, 03:28 PM
    Back in the day,and not to long ago,I installed a closed combustion coleman gas furnace, I learned the hard way,I had the same problem the code was tell me ignition failure. Well I checked everything,well when I sat down and carefully read the install instructions, I realized there was one thing I didn`t do,so I went and got a new expandable roof jack installed it ,and it worked perfectly,, this is all I know about the subject,, not that this is going to fix yours,, but,but,but.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace [ 4 Answers ]

Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.

Coleman evcon [ 1 Answers ]

I installed a Honeywell digital thermostat for my parents, which I have done myseld with no problems before. Foolishly, I didn't notice that the coleman evcon system has a couple more wires that the honeywell didn't have a place for, so I undid the wiring, and hooked the old therm back up. Note: I...

Coleman Evcon [ 2 Answers ]

My mother has a Coleman Evcon dgat090800 the problem is that the burner will light up on it and burn until the blower kicks on then the burner will quit I can test parts on it but am not positive what the readings should be can someone help.

Coleman evcon [ 1 Answers ]

Furnace won't ignite the starter blower runs but nothing else happens

Coleman evcon [ 2 Answers ]

Fan won't come on in heat position

View more questions Search