Ask Experts Questions for FREE Help !
Ask
    basspaul's Avatar
    basspaul Posts: 24, Reputation: 1
    New Member
     
    #1

    Jan 19, 2010, 07:25 PM
    '91 Cutlass Supreme stalls on accel
    Hello,
    My son's 1991 Olds Cutlass Supreme stalls when accellerating from a stop. Ok once going. 3.1v6, auto transmission. Outside of this problem, it runs OK. Any help would be greatly appreciaetd.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jan 19, 2010, 08:06 PM

    Replace the Ignition Control Module (ICM) and coil packs. I recommend replacing these components every 120,000 or 10 years, whichever comes first. ICMs, particularly, are problematic components.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Radiator fan 1994 oldsmobile cutlass supreme [ 1 Answers ]

My son has a 1994 oldsmobile cutlass supreme, 3.1 v6. Neither of the two radiator fans will come on, car is over-heating.

1989 cutlass not firing [ 1 Answers ]

I've got a 89 cutlass calias with a 2.5l tech4 that won't fire on #2 cylinder. Changed wires and plugs still have no fire on that cylinder. Does anyone have and idea why

Balloon Accel time [ 1 Answers ]

From her bedroom window a girl drops a water-filled balloon to the ground, 6.9 m below. If the balloon is released from rest, how long is it in the air?

93 civic low fuel pressure. Hard accel is no good [ 1 Answers ]

Hey, I drive a 5speed 93 honda civic 1.5vtech.. theres probably more then one problem :eek: K first off my car starts kind of good when I start it off in the morning and also when I start it, at idle it shows that its at around 1500 rpm , then after I drive it a few min.. a few stop lights later...

Alternator R&R Cutlass [ 1 Answers ]

I am looking for info about replacing an alternator of a 1991 Cutlass Supreme 3.4 liter V6 24 valve DOHC engine. Alternator is located under engine on passenger side, above drive axle. I can see it by removing front wheel and rubber water shields. Do I have to remove lower control arm and drive...


View more questions Search