Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs and stratton vanguard 16 hp twin engine with no spark
[ 10 Answers ]
I have a new Briggs and Stratton Vanguard 16hp twin installed in an ATV. Unfortunately on a shakedown run the exhaust pipe loosened and fell on the wireing harness from the ignition key and the engine immediately stopped as the pipe melted through the wire insulation, I assume shorting something...
Oil capacity of Briggs & Stratton 402707 opposed twin?
[ 3 Answers ]
Hi, Does anyone know the Oil capacity of the Briggs & Stratton 402707 16HP opposed twin? Also, the engine is making a rattling noise like the fan is touching the inside of the shroud or the shroud itself is rattling around. Has anyone had experience taking one of these beasts partially apart?...
Engine switch V twin briggs for Briggs intek ohc
[ 2 Answers ]
I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1 Thank...
Briggs and Stratton opposed twin NO SPARK
[ 2 Answers ]
I have an old dresser lawn tractor. It was running when I parked it last fall. Now it cranks but won't start. I can't detect any spark. I removed the kill wire from the magneto & jumped the solenoid; spins, but still no spark. There are interlocks on the mower engage lever, but the clutch & seat... View more questions Search
|