Ask Experts Questions for FREE Help !
Ask
    ColdInFlorida's Avatar
    ColdInFlorida Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 11, 2010, 04:23 PM
    We're Cold - Thermostat Hookup (RiteTemp stat / Janitrol HVAC)
    Installed a new thermostat in the summer, and it was working fine for A/C. but it's now unusually cold here in Florida (like many other places), and come to find out the heat isn't working.

    Goodman Janitrol AW3642
    Airconditioner/Electric heat unit wires:
    Yellow, Blue, Red, Green, Black

    Ritetemp 6022
    Thermostat COnnections:
    C, B, O, W2, W, Y, Y2, RH, RC, G, A

    Here's how it is currently hooked up:

    White - W
    Yellow - Not Hooked Up
    Red - RH
    Blue - Y
    Green - G

    This works fine for the A/C, but no heat. I uploaded a pic of the schematic attached to the HVAC unit:

    http://img42.imageshack.us/img42/1862/cimg03831600.jpg

    It's going to be another very cold night (my 6-year-old son woke up cold as ice this morning), so any help is *greatly* appreciated.
    ColdInFlorida's Avatar
    ColdInFlorida Posts: 3, Reputation: 1
    New Member
     
    #2

    Jan 11, 2010, 05:53 PM

    Oops, the wires coming out of the wall are:

    Yellow, Blue, Red, Green, White

    No black, sorry
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #3

    Jan 11, 2010, 08:43 PM

    I wish I could help but it is very hard to do wiring when the colors don't match the terminals and I can read the diagram that you posted.

    The R on Rh is right and the W on W should be right. If the thermostat is one that you operate by touching the screen and has all the readouts on the screen then make sure that you have you settings right. It probably should say "Heat" and also "Emergency Heat"
    ColdInFlorida's Avatar
    ColdInFlorida Posts: 3, Reputation: 1
    New Member
     
    #4

    Jan 11, 2010, 09:15 PM
    Quote Originally Posted by letmetellu View Post
    I wish I could help but it is very hard to do wiring when the colors don't match the terminals and I can read the diagram that you posted.

    The R on Rh is right and the W on W should be right. If the thermostat is one that you operate by touching the screen and has all the readouts on the screen then make sure that you have you settings right. It probably should say "Heat" and also "Emergency Heat"

    All of the settings on the thermostat are correct, and I'm very familiar with how to use this model, since I used the same one in my old house. Here's a much higher resolution image of the wiring schematic:

    http://www5.picturepush.com/photo/a/...mg/2765538.jpg

    Does that help at all? It's after 11pm, and it's already getting cold in here. Outside temps are supposed to fall into the mid 20's tonight. :eek:

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Janitrol Thermostat with RiteTemp [ 9 Answers ]

I have a Janitrol heat pump system and I want to replace the thermostat with a RiteTemp digital model 6025 thermostat. My problem is in identifying what kind of wiring I have so that I can pick the right wiring directions for the new RiteTemp thermostat. My Janitrol Heat Pump thermostat has the...

Replace janitrol 18-60 thermostat with ritetemp 6022 [ 4 Answers ]

I'm trying replace janitrol 18-60 thermostat with ritetemp 6022 . System is 2 stage heatpump w/strip back-up Janitrol inside has 2 mercury switches and wires configured like this: Y G R O W2 E C W2 is white wire E is Black wire C is Blue wire...

Replace janitrol 18-60 thermostat with ritetemp 6022 [ 1 Answers ]

I'm trying to replace janitrol 18-60 thermostat with ritetemp 6022 Need help with wiring .

Janitrol 7 wire to HW programmable t-stat wiring [ 2 Answers ]

I have a Janitrol heat pump system with emergancy heat. It has 7 wires and I am going to a Honeywell RTH 6400D programmable unit which has only 5 wire lugs. I believe I know how to do the conversion but need confirmation. Can you tell me how this should be wired? Thanks much

Janitrol to ritetemp thermostat conversion [ 1 Answers ]

I am trying to install a ritetemp 8050C model thermostat to replace the Janitrol thermostat that came with my Goodman-Janitrol two-stage, heat pump system. There is an "E" terminal on the Janitrol unit (seven wires) but no corresponding terminal on the ritetemp unit(six wires). What is the...


View more questions Search