Ask Experts Questions for FREE Help !
Ask
    M&KL's Avatar
    M&KL Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2010, 05:03 PM
    Where is the reset button on trane heat pump??
    I changed the thermostat, it didn't work. Called tech support, they told me to reset my heat pump. I don't know how.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 7, 2010, 05:33 PM
    Not knowing the model number its impossible to say,, most don`t have a reset button
    javi65's Avatar
    javi65 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 13, 2011, 07:30 AM
    Why my heat pump dose not come on?
    javi65's Avatar
    javi65 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Nov 13, 2011, 07:32 AM
    Well what I need to chek thr out side unit dose not come on ?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane XL20i heat pump requires Trane 900 series thermostat? [ 2 Answers ]

Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.

My Trane Auxiliary heat on heat pump is tripping breakers. I think all 3 elements are g [ 0 Answers ]

All 3 white control wires on 3 contactors to elements gets energized at the same time even when only calling for 2-3 degrees increase. Is that normal? I thought it was setup to increase elements based upon the amount of heat called for? The point is breakers keep tripping in winter for the last...

Have to hit reset button on bottom of control box to get well pump to run [ 1 Answers ]

To get the pump to start I have to hit the rest button on the bottom of control box, the pump will then run as normal fully charging the tank until pressure vale kicks it off, it will run water for quite some time before pressure gets low enough to kick the switch back on but I have to reset the...

Kenmore ultrawash control panel won't reset and no heat dry button keeps blinking [ 0 Answers ]

Some of the buttons on the control panel won't light up at all. If I press normal wash the no heat dry button lights up with it and then I can't press start. No matter what I push (other than drain/cancel) the no heat dry/lock button is on. I've tried unlocking it, turning off the breaker, pushing...

Trane Heat Pump [ 6 Answers ]

I have been working on a Trane Heat Pump and the problem I'm having is the thermostat won't engage the compressor for heat, but it does on cooling mode, and in fan only mode. I jumped the thermostat at RH and G and the unit kicked on. I have replaced the thermostat and still it does the same...

View more questions Search