 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to wire for 220 baseboard heater and thermoostat
There were two baseboard heaters in a mobile home. One was removed, not sure how the wires were capped off. The thermostat is wall mounted. The Base heater is wall mounted near the floor The heater remaining worked for two years and then stopped working. First I would like to check the thermostat an baseboard for proper voltages. Can you tell me how?
|
||||
Check out some similar questions!
This is my first post, so thanks in advance for any help. I'm finishing my basement & am installing a pair of Marley electric baseboard heaters in parallel. I've got the basics done: double 20 amp breaker, 12ga wire, Double line break thermostat. Here's the issue: The units will accept left or...
I went to replace an old baseboard heater. The black wire was black instead of copper colored. Sounds like this is not right. What could it be, and do I have to replace the whole wire inside the wall. Was wondering if this could have been caused by one of the two heater wires (connected...
Hey All, Maybe you can help. I'm installing four 240V baseboard heaters to a room in the back of my house with a total amp rating of 17.7 amps. I intended to use a double pole 20 amp breaker and 12/2 romex, but my brother says I should use a 30 amp breaker and 10/3 wire. The furthest heater...
Friends put down a floor and had to unwire my baseboard heaters. They couldn't remember how to rewire the heater with the thermostat. The heater with the thermostat works, but the other heater stays on. Here is how the heater with the thermost is wired: ...
Can I hook (2)two 220 baseboard heaters to (1)one 220 circuit?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
