Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is the inducer motor
[ 3 Answers ]
I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...
The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman.
[ 8 Answers ]
FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S
Inducer always on, but no heat
[ 6 Answers ]
Hi! I am getting at the end of my rope. My problem: the thermostat calls for heat, the inducer starts, but the furnace does not light up. This started about two months ago, intermittently. Recently, it happens more and more often. One way to get it going was to play with the thermostat - first...
Hvac inducer
[ 2 Answers ]
What does an inducer do on a hvac system. Is it a problem if the gasket is bad on the inducer?
Inline inducer
[ 3 Answers ]
The room over my garage is the furthest room my furnace. It is colder in the winter and hotter I the summer than the res of the house. I am thinking of buying an inducer to boost air flow. Should I install the one with the heater as well? What happens in the summer with air conditioning? Where is... View more questions Search
|