Ask Experts Questions for FREE Help !
Ask
    earlassoon's Avatar
    earlassoon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2010, 07:24 PM
    Bryant furnace 80 plus igniter not workinging
    Getting a code 14.
    1st the system comes on. I hear the blower going for about 90 seconds.
    2nd the blower wheel spins and eventually I start to smell gas.
    The unit clicks 3 times but the ignitor never comes on. That's when I get a code 14.
    I cleaned the hot surface ignitor but it doesn't ever ignite.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 2, 2010, 07:43 PM
    Does the hot surface ignitor glow during the start up of the furnace? How about a complete accurate model number?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman Evcon Furnace igniter [ 1 Answers ]

We have had to replace the igniter in our furnace at least 4 times in a little over a year. What could be making them burn out? We had two go out in just one weeks time! This was 12-25-07. We had a new one installed late April of this year so it wasn't used that much. We turned the furnace on last...

Igniter will not light furnace [ 3 Answers ]

Carrier gas furnace will try to start, but igniter does not light furnace. Red light in window flashes -is thiis the "code" for the numeric list on the attached plate?

Janitrol Condensing Furnace Igniter [ 1 Answers ]

Hello, What would cause an igniter glow plug to try and light the gas when the cooling is running? I had a problem with a clogged condensing drain and was leaking water out of the overflow drain next to the condensate line, this water made it's way down through the furnace to the floor. The...

Furnace igniter fails to fire [ 2 Answers ]

The furnace igniter fails to fully light the furnace. If I turn off the frurnace, then the igniter will fully work properly. Does theigniter need to be replaced?

View more questions Search