Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   My thermostat works fine in a/c but for the heater I have to put the fan on manual (https://www.askmehelpdesk.com/showthread.php?t=430722)

  • Jan 2, 2010, 06:24 PM
    radstones71
    My thermostat works fine in a/c but for the heater I have to put the fan on manual
    I have a hunter thermostat model 44860, and a central air heating a/c unit. The air conditioning system works fine. The heating side however does not kick on the fan in auto, I have to switch it to manual on then of course it doesn't shut off if I don't turn it off because it in on mode not auto? Is there a limit switch that's bad or wiring issue?
  • Jan 2, 2010, 07:07 PM
    radstones71

    Found the problem, it was a loose wire. The connection between the rc/rh terminals was loose.
  • Jan 2, 2010, 09:24 PM
    mygirlsdad77

    Glad you got it fixed, that would have been a hard one for us to help with. Good job.

  • All times are GMT -7. The time now is 03:13 AM.