 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My whirlpool dryer GEW9200LW won't get hot
I have a Whirlpool Duet dryer GEW9200LW that won't get hot. It would get hot but only stay on for short periods then shut off with E2 error code. Then it stopped blowing heat. We replaced both the thermal fuse and the thermister and still no heat. There's power going to everywhere it needs to go. What could it be?
|
||||
Check out some similar questions!
It kept giving the error E2 so we replaced the thermistor and the thermal fuse but just this morning (prior to replacing these), the heat stopped completely now it spins but it won't get hot. What could it be?
I know this question was asked before but I can seem to figure out how to get this done, I have a whirlpool dryer that runs but will not get hot LER463JQ1- D433-ELE-2406028-FM54 120/240v (I copied all of this off the dryer) please help me I can't afford a service repair because not under...
I have a Whirlpool dryer, model GGQ8811PW0, that is about 5 years old. Dryer starts, drum rotates, however, there is no heat. Is this likely the ignitor or a heat sensor? If it is the ignitor or a heat sensor, would it be located behind the front dryer panel? Is their a device I can use (meter)...
My whirlpool dryer is a Roper model. I am having problems with it shutting off in the middle of the cycle. It is like it is getting to hot, because if I put a small load in it at night when it is cool then it runs fine. Now the problem is that it is smoking. We have already cleaned all the lint...
This is probably normal, but I've never seen it until this morning. Whirlpool Supreme Electric dryer - while running I happened to turn off the lights and noticed a red glow coming from the back of the unit reflecting off the wall. There's a glow on the lower right hand side near the floor and I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
