Ask Experts Questions for FREE Help !
Ask
    DESTINY97's Avatar
    DESTINY97 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2009, 10:58 AM
    Intertherm furnace manual G5RA060
    My system was working fine 2 months ago. Just now wanted to turn it on. And now it will not turn on at all. Any help would be great. Thanks it is a intertherm g5ra060

Check out some similar questions!

Intertherm furnace [ 3 Answers ]

My 8 year old Intertherm forced air furnace won't fire. Igniter is good red led is blinking twice says it's a pressure switch is open. Anything I can do myself?

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Intertherm furnace [ 2 Answers ]

I have just in the last month had an Intertherm furnace installed, and since installation they have had to come in twice because they claim the starter button is not firing. They replaced it and now it is on the fritz again. It starts for about 8 seconds and cuts out. There is fuel in the tank....

Intertherm Furnace [ 1 Answers ]

My pilot light comes on and ignites heat exchanger but when the cover closes the flames shut down. The blower works but heat exchanger will not stay lit. I have replaced the gas valve and the thermo couple. Suggested that damper valve needed to be adjusted - where is the damper valve

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.