Hampton Bay ceiling fan transmitter

LaCandelita Posts: 2, Reputation: 1

New Member

Dec 25, 2009, 12:39 PM

Hampton Bay ceiling fan transmitter

Temperature sensor in the remote does not work in Hampton Bay ceiling fan

ceilingfanrepair Posts: 5,733, Reputation: 109

Uber Member

Dec 25, 2009, 10:20 PM

Contact the manufacturer, their number is in our sticky.

Add your answer here.

Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay ceiling fan fan on/off chain broke in housing [ 4 Answers ]

What part of the ceiling fan needs to be removed to get at the on/off chain housing?

Taking a Hampton Bay Ceiling Fan off the ceiling [ 2 Answers ]

Can you tell me how to remove my ceiling fan off the ceiling. I don't know how to get the cone-shaped piece that is touching the ceiling off. Thank you.

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?