Ask Experts Questions for FREE Help !
Ask
    luweegy's Avatar
    luweegy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2009, 06:04 PM
    Goodman furnace
    I've got a Goodman Model #GCH90904CXAB It is 2 yrrs old and heated fine all last season.This season it has started to run 20-30 minutes and will shut down and flash 4 times .Which says high limit switch on the door.My techs have replaced the roll out switch and the high limit switch.It still does the same thing.About a month ago we had a bird in the 3" exhaust pvc,we removed pipe and induction blower fan,cleaned everything up and have had this high limit ever since.We have cleaned the A-coil and the whole return system.Any Ideas? Thanks,Tom
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 22, 2009, 04:57 AM

    Check gas input & temperature rise. If input is correct but rise is high, try increasing blower speed until rise is correct. P.S. what type of air filter are you using? Same type as last year?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman furnace [ 1 Answers ]

Good man furn blinks 6 times No power at therm Blower runs

Goodman Furnace [ 1 Answers ]

My furnace is pulsating, gas valve is clicking on and off rappidaly, I shut it off for a short time then it will work for a few hours then start acting up again installed new air pressure switch no change,do you think I should replace the flame sensor.

Goodman Furnace [ 2 Answers ]

What does A three blink code on a Goodman 80 plus gas furnace mean

Goodman Furnace w/AC [ 1 Answers ]

I am replacing my 28 year old furnace with a Goodman furnace and an AC unit. Never had central air before. I have read conflicting reports on the quality of the Goodman line and wondering if I am making the right purchase. I am getting a 95% efficient, 90,000 BTU, 2 stage heating with a variable...

View more questions Search