Ask Experts Questions for FREE Help !
Ask
    dcates's Avatar
    dcates Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2009, 07:02 AM
    Trane xv80 won't light
    I have a trane xv80 ,burner not working but the blower is

Check out some similar questions!

Trane xv80 not staying lit [ 4 Answers ]

My furnace is 5 years. Every time it calls for heat it fires up just fine but then after 3 sec. the gas turns off, it repeats this cycle until it locks out the system. I have reset the system, checked all the wiring for loose connections but cannot get it to run. Please help me.

Trane xv80 fan runs in on but not auto [ 2 Answers ]

Trane xv80 starts and runs fine... there is nice blue flame, everything is blowing, then the main blower quits, flame keeps going until safety device shuts it off. This is all with fan in auto or on position Without call for heat, fan runs all day in on position, and does not run in auto...

Trane XV80 and Honeywell RTH7500D [ 1 Answers ]

Having some problems. Background: Trane XV80 and Honeywell RTH7500D I have 5 wires coming from the controller board on the gas furnace: W1 (white) R (red) G (green) Y (yellow) and

Trane XV80 blower not running [ 2 Answers ]

:( I have a Trane XV80 blower motor will not run, it will spin freely, the control board has normal slow blink, but GS3 yellow LED light above green wire is on, when A/C turned on the condensing unit runs but no blower, Heat on no blower but get trouble light high limit lockout, and just turn...

Trane xv80 [ 1 Answers ]

Main blower mysteriously stopped working on Trand XV80. I've gone through the owner's manual. No fix. Vent blower works, flames present, no main blower. 16 Months old. Any suggestions?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.