 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Can I replace an ITE EQ 9483.200 amp main breaker with an EQ 9685?
I am replacing a 200 amp main breaker(ITE EQ 9483). The replacement breaker that I have is an( EQ 9685).Will the feed lugs of the old breaker attach to the lug stab of the new(EQ 9685) breaker?
|
||||
Check out some similar questions!
On the box it says it is a 100 amp breaker box and I have 1 50 amp breaker .2 30 amps breaker and 3 20 amps breakers if I add all the breaker it is 170 amps and my breaker box is for 100 amps is that how it works? Do I need a bigger breaker box? Is it unsafe...
I recently purchased a new hot tub. The tub arrived and it only requires 30 amps. The electrician hooked it up to 50 amp breakers (outside box and inside on the main) Is this safe??
I need two replace a bad two pole breaker in main panel boxwhat tools do I need
I have a large attic (on 3rd floor), 38'x28', which is unfinished space. The 2nd floor central air-condition is located there and used to be fed by a 60 feet of 12/3 cable (I changed the cable to 10/3 to reduce the chance of voltage drop) and it's fed by a dual 15A breaker (240v breaker) in the...
I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
