 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas furnace model guh100AO16 runs cycle but fan stays on untail I unplug it
Gas furnace model GUH 100AO16 Arcoaire. Furnace runs cycle and heats up to temperature on thermostat but the induction motor does not shut off at the end of cycle which keeps the main fan motor running and blowing cold air.
To get this motor to turn off I have to go to the furnace and unplug the outlet. |
||||
Check out some similar questions!
We have a gas furnace with 110 blower and it is not blowing hot air. We changed the thermostat and its still not working. When thermostat was placed in the off position it cont. to blow cold air so we shut off the breaker
I have an older temco wall furnace. My problem is that the blower motor fan runs off and on. It will run few seconds then shut off few seconds. Sometimes it will make a longer run but never runs a full cycle to bring room up to temp. Set thermostat to run longer cycle and didn't help. It has a...
Last night my furnaces blower motor started making noise. I planned on calling someone to check it but shortly after I got home, it REALLY was loud so I shut off the breaker for it and the thermostat. Here are the pictures... http://www.flickr.com/photos/45460567@N05/ It is so old... is...
Dup
Furnace runs through cycle but at the end blower does not shut off and continues to blow cold air until I manually go to the furnace and unplug the plug at the outlet.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
