Ask Experts Questions for FREE Help !
Ask
    ebbtyde's Avatar
    ebbtyde Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2009, 08:45 AM
    When is a inducer motor on a carrier 48GS due for replacing
    I replaced the heat exchanger on our carrier 48GS propane furnace last year.It was clogged with sooty debris.It worked fine till recently.The fan continues running but no heat.I noticed sooty build up around control panel,as well as Aldehyde odors.My question is:Can the inducer motor be the cause?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 11, 2009, 10:38 AM
    If you have a soot problem I would call for service from a on site HVAC company. Soot is never acceptable and something is not operating or adjusted properly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inducer Motor Needs Replacing in Furnace [ 7 Answers ]

What can be another solution to problem. Problem, inducer makes hummimg noise. Is $400 cost to replace and another $400 for labor?

Carrier 58 motor inducer [ 1 Answers ]

We are freezing due to the inducer motor on our carrier furnace having gone out. The repairment left at quitting time WITHOUT installing the new one! Can you please help us with the reinstallation process? Its only 6 degrees and the temperature is falling.

Inducer motor overheats (carrier brand furnance) [ 10 Answers ]

I replaced my inducer motor on my furnace due to the old one was bounding up. Now the new one runs find in low speed but once the furnace kicks into the second stage the inducer motor shuts down(in high speed) which I believe the thermal overload(built in) opens causing my furnace shut down. When...

Carrier weathermaker800 inducer motor noisy [ 2 Answers ]

How do I clean or lubricae this part

Our Carrier Furnace Combustion Air Inducer Not Rotating [ 3 Answers ]

It's Saturday night, no luck with finding a service repair guy. It looks like our Carrier White Rodger 36E furnace air inducer rotation is not spinning when we attempt to turn on the heater. The rotation wheel makes a loud grinding sound, we try to help it spin, it goes a little, but then stops. ...

View more questions Search