Ask Experts Questions for FREE Help !
Ask
    joseluismaria's Avatar
    joseluismaria Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 9, 2009, 08:21 PM
    Lennox furnace e10 conversion from electric to gas
    I wish to convert a lennox e10 from a electric furnace to a gas furnace

    Is that possible
    Relatively how much would that cost as compared with changing out the whole system
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 9, 2009, 08:49 PM

    Anything is possible, but not everything is practical. Considering what you would invest in time and parts, replacing the unit is the way to go.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox electric furnace [ 5 Answers ]

I have a lennox electric furnace w/ac. It is about 30yrs old and just stopped heating. How hard is it to replace the heating elements? Can I do it myself?

My gas furnace doesn't light pilot ilght come on but gas doesn't come on [ 1 Answers ]

Gas furnace doesn't come on the fan for fresh air/exhaust and pilot light comes on but gas valve not letting gas in to burner so it doesn't light,but if I turn off power and back on three or four times it will work until house cools and need heat again

Lennox Electric Furnace doesn't restart [ 3 Answers ]

Hi, I have a Lennox EC10 electric furnace that doesn't seem to start when the thermostat demands. The furnace does start up but the air is not really hot so it seems to stay on for such a long time before the thermostat is satisfied. I was using a digital thermostat and thought that something may...

Lennox electric furnace, blower off alignment, rubbing housing [ 1 Answers ]

Excuse my lack of mechanical knowledge and I hope I can explain the problem in an understandable way. The blower on the electric furnace has gotten out of alignment(?) and is rubbing the housing(?). I can put it in the correct position so it does not rub by physically holding the shaft but cannot...

Wiring diagram for a Lennox Model E8-25-1 Electric Furnace. [ 1 Answers ]

The wiring Diagarm on the front panel is not clear enough to read. Also I need to know the proper sequencers & limits to use in this furnace. The furnace has been worked on by several people and I would like to rewire With all new parts

View more questions Search