Ask Experts Questions for FREE Help !
Ask
    xANGELy's Avatar
    xANGELy Posts: 5, Reputation: 1
    New Member
     
    #1

    Dec 9, 2009, 09:27 AM
    3 baseboard heaters and only one setting? Can I change that?
    Hello,
    I have 3 baseboard heaters in my place, 2 of them in an open concept in living room/dining room area and 1 in bedroom. Right now they all operate on 1 single thermostat and I was wondering if there is any way of changing that so I could have 2 separate thermostats. One that would be for the bedroom only and one for the open concept living room/dining room?
    If there is, then please help me on how should I do it.
    Thank you.

Check out some similar questions!

Baseboard heaters? [ 1 Answers ]

Help , I do not understand the diagrams to a plf series Fahrenheat eletric/hydronic heater . There are a blck, and a red and a black and a red and a green . The same for the 2 pole therrmostat. One says L1 The power source is black ,red,white and ground . Help Sharon:confused:

Baseboard Heaters [ 1 Answers ]

I am going to install some baseboard heaters in my basement and need to know how far off the floor do they get mounted or do they set right next to / on the floor? Any info on this I get is appreciated. Thanks. S N

Baseboard heaters [ 2 Answers ]

I have baseboard heaters (240) I have two hots coming in to the thermostat one black one white marked as hot I have the black wire feed and the thermostat top wire ran to the black wire of the heater I have the white wire from feed to bottom wire of thermostat and the to the white wire of the...

Baseboard heaters [ 11 Answers ]

I am getting ready to put in 4 baseboard heaters 3 of them will be in one room upstairs and the other downstairs. I need help wiring them all. Let me clarify, the 3 baseboard heaters need to be wired together on one breaker and the other will be on its own breaker. Help.

Electric baseboard heaters -wiring 1 thermostat to two heaters [ 2 Answers ]

I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.