Ask Experts Questions for FREE Help !
Ask
    magdkg's Avatar
    magdkg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2009, 10:07 AM
    Bulb Socket Replacement
    How do I remove the bulb socket from a Litex Ceiling Fan/Light to replace it with a new bulb socket?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 11, 2009, 11:34 AM

    There is usually a screw in the back of the socket. Make sure the power is off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What do I do with the red wire? Socket replacement [ 7 Answers ]

GOt some paint on a socket. Need to replace it? What do I do with this damn red wire? Thank you, Ace.

When using a 3 way bulb in a standard light socket, which wattage lights up? [ 2 Answers ]

When using a 3 way bulb in a standard light socket, which wattage lights up? Lets say you screw in a 50-100-150watt 3 way bulb in a standard on/off lamp, which wattage will turn on when you turn on the lamp. What happens if you put a 3 way bulb into a non-switched lamp, planning to use a foot...

Using a twin bulb adapter in a 3-way lamp socket [ 3 Answers ]

In order to increase the light output from a lamp, I've purchased a twin socket adapter (shaped like a Y) that screws into the existing socket. The lamp has a 3-way socket that works fine with a 1-way compact screw-in fluorescent bulb. However, when I screw in the adapter with two compact...

View more questions Search