 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trailing arm bushings
1990 honda civic DX. I am replacing the trailing arm bushings (rear suspension). The replacment bushings have the 2 hole metal plate already in them. Question: how do I press in the new bushings and should they be glued? Also, how are the rear tires "aligned" after re-installation of the trailing arm and other components?
|
||||
Check out some similar questions!
Lower spray arm in whirlpool dishwasher
[ 2 Answers ]
I have been trying to get the plastic bolt out of my dishwasher to release the lower spray arm and I've rotated it both clockwise and counter clockwise hundreds of times with no progress. What am I doing wrong that's keeping it from unscrewing from the spray arm? A technician came to fix my...
Shower arm thread broke off in pipe
[ 1 Answers ]
How do I fix this?
Can't get lower spray arm off Kenmore Dishwasher
[ 0 Answers ]
I have read the fixes to what appears to be our problem with the top rack of our Kenmore D/W not getting clean. Seems to be either the filter or water inlet value. We're trying the filter first, but can't get the lower spray arm off. There is one large plastic "screw" in the center but it just...
What is this trailing succulent?
[ 1 Answers ]
I have searched and can't figure out what this is. I live in Florida, and I've seen it growing on trees as well.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
