Ask Experts Questions for FREE Help !
Ask
    ResourcefulRoxi's Avatar
    ResourcefulRoxi Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2009, 05:48 PM
    How to remove Mazda MX6 distributor
    There are 2 silver philips/flathead screws on the distributor but they won't budge. Any Idea how to get them out without stripping them?
    Tapped the one distributor cap screw that broke off and the tapper broke off in the hole. Can't get it out. AAAHHHH Any ideas other than wiring the cap on.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 3, 2009, 06:14 PM

    Try applying PB Blaster or Kroil, first, and allowing it to soak. Use a high quality Philips #2 screwdriver to remove the screws; i.e. the omnipresent bit-head screwdrivers on the market today.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you remove the 93' Civic distributor? [ 7 Answers ]

Hi, I've got a 93' civic dx hatchback, and the car no longer starts. It died one day while I was driving. Anyhoo, so when I don't jump the little switch with a paper clip, the CEL light comes on for 2 seconds, then goes off, and I hear the fuel pump click. When I do jump the cables, the CEL comes...

94 Mazda MX6 distributor [ 0 Answers ]

I was getting sparks running across the top of my distributor cap. Mechanic said to replace it. One screw was already broken off. Even though I tightened the other very carefully it snapped too. Have to tap them out, but can't get the distributor off. Removed two bolts but it won't come off....

What is the difference between a Mazda T30 and a mazda T35 [ 0 Answers ]

Hi If anyone could help me with the above I would be most grateful Thanks

Distributor box [ 1 Answers ]

How do I take out the distributor box on a 94 honda civic ex?

Distributor [ 6 Answers ]

I need to remove my igniter so do need to remove my distrubetor from 1988 honda civic lx, and do I have to realing the timing. Thank you

View more questions Search