Ask Experts Questions for FREE Help !
Ask
    da's Avatar
    da Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2009, 07:47 PM
    Can you turn the flame down on the furnace
    I have a gas furnace in the floor, but this year it seems the flame is blowing pass the iron crate
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 29, 2009, 07:48 PM

    Where do you live? Shut the gas off before you answer this post.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Nov 29, 2009, 07:49 PM

    Do you have a crack in the heat chamber? The flame should not be exposed to the metal floor grate.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Nov 29, 2009, 09:35 PM
    Turn off the furnace and call for on site professional help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace - no flame [ 4 Answers ]

Hope someone out there can help, because it's going to get cold this weekend! I have a split HVAC unit with furnace in attic. Written on front of unit is Intertherm. Inside panel of unit says Nordyne, and the Ignition Control is Robert Shaw. The unit is 13 years old and the heat worked fine...

Flame sensors on furnace [ 4 Answers ]

Should a person take this flame sensor off and use steel wool to clean it, or what does the flame sensor do? Mine is on a electronic Rheem furnace.

Furnace flame going out [ 0 Answers ]

Hi all,I have a rhhem furnace that's starts up fine and gets the burners going,however when the fan comes on it blows out the burners. What would do this?

Gas furnace, intermitant flame [ 1 Answers ]

I have a Day &Night gas furnace and the gas flame will stay on for a few seconds and then shut off for several seconds. The pilot stays lit and the thermostat calls for heat. The blower continues running as the flame cycles. Any idea where to start trouble shooting? Thanks for any help, Greg

Furnace flame cuts out [ 10 Answers ]

Having problems keeping flame burning in furnace.Oil furace hadn't been used in 2 years and had oil delivered recently.We figured the tank would be close to empty but were told after it was filled that it was already over 1/3 full. Furnace would light up with yellow flame but then turn blue and...

View more questions Search