Furnace flame going out

BADABOOMCO Posts: 1, Reputation: 1

New Member

Oct 24, 2009, 07:49 AM

Furnace flame going out

Hi all,I have a rhhem furnace that's starts up fine and gets the burners going,however when the fan comes on it blows out the burners. What would do this?

Check out some similar questions!

Gas furnace - no flame [ 4 Answers ]

Hope someone out there can help, because it's going to get cold this weekend! I have a split HVAC unit with furnace in attic. Written on front of unit is Intertherm. Inside panel of unit says Nordyne, and the Ignition Control is Robert Shaw. The unit is 13 years old and the heat worked fine...

No flame on Amana 80 SV furnace [ 0 Answers ]

New filter; turned thermostat on; blower runs but no flame. What could be the problem? Igniter? Flame sensor? I am not a techie so please give detailed description of how to troubleshoot. Thanks.

Gas furnace, intermitant flame [ 1 Answers ]

I have a Day &Night gas furnace and the gas flame will stay on for a few seconds and then shut off for several seconds. The pilot stays lit and the thermostat calls for heat. The blower continues running as the flame cycles. Any idea where to start trouble shooting? Thanks for any help, Greg

Furnace flame cuts out [ 10 Answers ]

Having problems keeping flame burning in furnace.Oil furace hadn't been used in 2 years and had oil delivered recently.We figured the tank would be close to empty but were told after it was filled that it was already over 1/3 full. Furnace would light up with yellow flame but then turn blue and...

View more questions Search

Check out some similar questions!

Add your answer here.