Ask Experts Questions for FREE Help !
Ask
    clason143's Avatar
    clason143 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 28, 2009, 07:40 AM
    Furnace won't restart after cycling
    If I manually turn the thermostat off then back on, my furnace will cycle once but won't restart until I turn the thermostat off anf on again
    emilime75's Avatar
    emilime75 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 30, 2009, 08:15 AM
    Have you ever figured this out? I am having a similar problem and am looking for possible fixes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace won't restart [ 27 Answers ]

Furnace will not restart, when temp. drops. When you turn the furnace switch off and then on the furnace will restart. This will happen several times a day, if nobody is home for a while it can get pretty cold.

Furnace restart [ 3 Answers ]

I need to know how to prime or get started my 3 year old furnace. I already followed the instructions on the cover but it did not work. I get the piolit lit but the furnace does not kick in. do I need to run water or make sure it has water, and how do I do that?

Furnace keeps cycling [ 6 Answers ]

I have a gas furnace that keeps cycling then kicks out for an hour. This started since the replacement of a fan motor. Warning code is four flashes. Already jumped all sensors that could be affected by this code all was good. Took filter out, cleaned A-coil. Not sure what else to do. :confused:

Furnace Cycling [ 1 Answers ]

My original gas furnace (70s' technology) and my new medium efficiency furnace share a common problem. The same problem existed with a conventional mercury thermostat and a modern programmable thermostat. When bringing up the temperature the furnace will shut down and then immediately begin a new...

Furnace off and on cycling [ 1 Answers ]

We had an air bubble in the vacuum system, removed the clamp, blew in the tube, problem solved-thanks for everyone who looked!

View more questions Search