Ask Experts Questions for FREE Help !
Ask
    georgepas's Avatar
    georgepas Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 27, 2009, 06:30 PM
    Wiring for a/c compressor
    I have red , yellow ,and blue wires that are not connected to the three positions in a triangle on the compressor of my outdoor unit . Which colour goes to which position ?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 27, 2009, 06:32 PM

    Locate the wiring diagram off the back of the door. Also see what color wire is hooked to the start capasitor. Why were these wires removed?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Central Air Compressor Wiring [ 4 Answers ]

My Compressor Quit Working A Few Months Back. The A/c/ Repair Guy Stripped The Burnt Wire On The Compressor And Added A New Wire It Worked Ok. I Called Another Company For My Yearly Service He Said The Wire Was Burn . He Pulled All Of The Wires Lose And Left. The Unit Is A Bryant That Says 1982...

Wiring new compressor fan [ 2 Answers ]

I am replacing my Rheem AC Compressor fan. The old fan had 3 wires. Brown, Orange and Black. The new motor has 5 wires. Orange, yellow, Brown, Purple and Black. What do iI do with the Yellow and Purple Wire?

Compressor Wiring [ 2 Answers ]

I am replacing a faulty compressor pressure switch and have a question... The new switch has different terminal labels / designations. My three wire 120V power cord has Black (hot), White (neutral), Green (ground) wires... correct? The pressure switch has terminals labeled MOTOR, LINE, and...

Wiring new compressor contactor [ 3 Answers ]

Hi, thank you for looking at my post. My old contactor has 2 sets of 2 posts on one side (see picture http://www.arnoldservice.com/burnt%20contactor.jpg ) and my new contactor has 2 posts on opposite sides of the contactor (see picture http://images.grainger.com/images/products/5B133.JPG ). My...

Wiring for air compressor mtr [ 1 Answers ]

I have a very old air compressor with a dayton motor. When I got it someone had robbed the pressure switch from it and just cut the wires. Model no. 6K969E. 230 volt, 32 amp. I can't seem to figure out the wiring and I really don't want to smoke the motor. It also has a thermal protection switch....

View more questions Search