Ask Experts Questions for FREE Help !
Ask
    pastormtj's Avatar
    pastormtj Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2008, 01:57 PM
    Wiring for air compressor mtr
    I have a very old air compressor with a dayton motor. When I got it someone had robbed the pressure switch from it and just cut the wires. Model no. 6K969E. 230 volt, 32 amp. I can't seem to figure out the wiring and I really don't want to smoke the motor. It also has a thermal protection switch. Can anyone help me out, I'd greatly appreciate it!
    rsain2004's Avatar
    rsain2004 Posts: 207, Reputation: 6
    Full Member
    		  
    #2

    Jun 19, 2008, 03:10 PM
    Look inside the motor connection terminal cover, located on the rear bell-housing. There should be a schematic showing how to wire the motor for at least two voltages. If not, copy the motor frame number from the data plate, and ask Dayton on the 'net. Consider the Public Library, and check out "Uglys' Handbook". It's an electrical handbook which may prove useful...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Central Air Compressor Wiring [ 4 Answers ]

My Compressor Quit Working A Few Months Back. The A/c/ Repair Guy Stripped The Burnt Wire On The Compressor And Added A New Wire It Worked Ok. I Called Another Company For My Yearly Service He Said The Wire Was Burn . He Pulled All Of The Wires Lose And Left. The Unit Is A Bryant That Says 1982...

AC Compressor fan motor wiring 3 versus 4. [ 2 Answers ]

I tried the suggestion from "lemetellu" (see below) and it worked however the fan will not cut off when compressor does. Any more suggestions... Any help is appreciated. Motor wiring: Black wire: to "Line" Yellow wire: to "Line" Solid Brown Wire: to one side of Cap Brown Wire with...

AC Compressor fan motor wiring 3 versus 4. [ 3 Answers ]

Need wiring directions to the following mess. 3 (old motor) verus 4 (new motor) wires and different colors to boot. I have a Goodman Mfg. Compressor Model CK30 1B that had a GE P870S motor that went out. Old Capacitor (GE #97F9834) is a three plug version. GE Motor Wiring: (Blk, Brn, and...

Kenmore refrigerator compressor wiring [ 0 Answers ]

Hi, I have a Kenmore refrigerator model 106.50599000. I just order a new harness and original capacitor for it. The problem I have is the technician my brother hired before cut the original wiring and put in some replacement capacitor that connect to the compressor. And now the evaporator fan is...

Wiring prob? - compressor won't kick on [ 1 Answers ]

I had some work done by a repairman last fall because my pilot would not light. He said it was a wire that came loose and fixed it. Now, my compressor won't come on. Blower comes on fine. Based on some other concerns with this repairman and the previous problem, I suspect wiring. Plus, there...

View more questions Search