Ask Experts Questions for FREE Help !
Ask
    melindaj2's Avatar
    melindaj2 Posts: 34, Reputation: 1
    Junior Member
     
    #1

    Nov 26, 2009, 06:05 PM
    Installing Tub and shower
    No hot water

Check out some similar questions!

Installing a One-Piece Seamless Tub Surround. How much I should I charge? [ 5 Answers ]

I'm installing a One-Piece Seamless Tub Surround. How much I should I charge? I don't have to do any plumbing work. Just installation. Charge by the hour? Or For the job?

New Moen water comes out shower head and tub spout [ 6 Answers ]

I installed Moen 82244HH Series with one handle tub/Shower valve. The problem is water comes the shower head even the tub spout is removed (only the pipe from on the wall. Water temperature mixture is correct, the handle turns CCW to ON and CW to OFF. I don't think I installed the valve upside down...

Low hot water pressure shower head and tub faucet [ 7 Answers ]

Hi - We have low hot water pressure from both our shower head and tub faucet It's a Delta single arm ball handle if that helps. Any suggestions would be appreciated.

Converting shower stall to Bath tub rough-in [ 1 Answers ]

I have a walk-in shower on top of a concrete slab. I would like to install a 60" tub. Will there be a p- trap in the slab? Will it be located as such to line up with a tub? If not what will I need to do? Also please provide rough-in demensions for a 60'' tub

Installing hand-held shower on fiberglass shower [ 2 Answers ]

I am installing onto a fiberglass shower a rain fall shower system that has a separate hand-held shower head. The two options to install are using a suction bracket or using the bracket with a screw. Can I drill into the fiberglass to use an anchor and screw? Thanks very much. Cheryl


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.