Ask Experts Questions for FREE Help !
Ask
    ericczarnecki's Avatar
    ericczarnecki Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2009, 06:02 PM
    Kenmore Front Load Washing Machine won't spin
    My washing machine just stopped spinning tonight. I've had it since 05 and there's no warranty left :( Any suggestions on getting it fixed or what's wrong with it??

    Model# 417.44082400
    Serial# xc51714384
    gilwiebe's Avatar
    gilwiebe Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 15, 2009, 07:50 PM
    Our Kenmore front load also quit spinning, also purchased in 05. I believe there should be a recall on this machine. I took the back plate off, and found BOTH shock absorbers broken. Our machine doesn't get a lot of use! The spinning problem looks to be the door latch? Not very impressed with this early break down. Have you solved yours?
    cg007's Avatar
    cg007 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 16, 2010, 10:57 AM
    Owow its same problem and same model# 417.44052400 and serial# xc51710407
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

Kenmore front load washer will not spin [ 0 Answers ]

Our Kenmore washer will not spin. It goes through the rest of the cycle, and works fine, until it gets to the spin cycle. No error code or anything. Then it just shuts off. Suggestions? Thanks!

Kenmore elite front load washing machine [ 1 Answers ]

The electrical wires that are attached to the inlet valve. I tried to pull them off but they did not come easy and I did not want to force them. Help

View more questions Search