Ask Experts Questions for FREE Help !
Ask
    nonnies49's Avatar
    nonnies49 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2009, 12:18 PM
    Kenmore elite front load washing machine
    The electrical wires that are attached to the inlet valve. I tried to pull them off but they did not come easy and I did not want to force them. Help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 6, 2009, 03:22 PM
    The wires use terminals that are really hard to remove sometimes. I usually grab them near the end with a small pliers and pull back slowly but with enough force so they come off. It on get damaged you can buy a replacement terminal at the hardware store.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Front Load Washer Clunking Noise in Spin Cycle [ 5 Answers ]

We have had a Kenmore Elite front load washer for a number of years (Model 970-38712-00). Today it started making a clunking noise when it started the high speed spin cycle (similar to putting a pair of runners in the dryer). I took off the back and spun the pulley by hand and heard a clunk...

Kenmore elite ht3 Front load door will not close/lock reset [ 1 Answers ]

How do you reset the machine or even run self test to find out what is wrong with it?:|

Kenmore Elite Washing Machine [ 1 Answers ]

My Kenmore washing machine begins to fill up with water, but in about a minute it stops filling up with water and begins making this horrible dead ringing sound. What's wrong please HELP!! :confused:

Kenmore elite washing machine [ 1 Answers ]

It says FL and do not know how fix it

View more questions Search