Ask Experts Questions for FREE Help !
Ask
    niceangel0724's Avatar
    niceangel0724 Posts: 9, Reputation: 1
    New Member
     
    #1

    Nov 21, 2009, 06:36 AM
    Thermopride gas furnace
    The led flash once and pause!!
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #2

    Nov 21, 2009, 06:41 AM
    Locate the service legend that describes the activity of the LED. Usually found inside the blower access panel or on the circuit board. P.S. Don't start a new thread with each response, just answer this question again. That keeps the thread history together.
    niceangel0724's Avatar
    niceangel0724 Posts: 9, Reputation: 1
    New Member
     
    #3

    Nov 21, 2009, 07:45 AM

    How I do that?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #4

    Nov 21, 2009, 08:45 AM
    Just click on "answer this question".
    niceangel0724's Avatar
    niceangel0724 Posts: 9, Reputation: 1
    New Member
     
    #5

    Nov 21, 2009, 04:57 PM
    I fix today ,was hard to find the problem but I went every single sensor and wires. thank you

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier gas furnace code 31 [ 3 Answers ]

Hi. I have a Carrier gas (propane) furnace 58MCA100-11116 series 111. It shows a code 31. The evacuation blower runs for a short time then kicks off. The burners do not ignite. To date I have: replaced the pressure switch, checked in and out lines to the pressure switch for obstruction,...

Thermopride gas furnace [ 1 Answers ]

I have a furnace thermopride natural gas with blower, about 12 year old ! The furnace does have a eletronic ign,turn on but the frame don't come on ,the machine keep doing that fill time and don't... everything works but the frame don't goes on ,I can see the red ign grows e turn off and no frame ,

Thermopride gas furnace [ 1 Answers ]

Yes everything works.but it is all eletronic ,I replace a new motor today,but the frame don't want goes on

Thermopride gas furnace [ 2 Answers ]

I have a furnace thermopride natural gas with blower, about 12 year old ! The furnace does have a eletronic ign,turn on but the frame don't come on ,the machine keep doing that fill time and don't fire up ! U have idea what the problem?? thank you

Thermopride furnace fizzles during cycles [ 10 Answers ]

I have a Thermopride, 2 stage NATURAL GAS fired Condensing Furnace Model # CHX1-75N Almost 5 years old 95% Efficiency Lux products programmable thermostat- Series 602 The issue that we are having is when the furnace has not had enough time to rest in between cycles. It will bring it up to...


View more questions Search