Ask Experts Questions for FREE Help !
Ask
    Chuck Griffin's Avatar
    Chuck Griffin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2009, 08:18 PM
    How to wire levitron decora pr 180 motion light switch
    The switch as four wires: one black, one brown, one red, and one green. I know what to do with the black and green wires. My problem is what to do with the brown and red wires. Does one or both of them connect to the white wire?
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    Nov 17, 2009, 08:58 PM
    Got a product number for this switch? Not familiar with the leviton switches that have leads, most have terminals.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Nov 18, 2009, 06:29 AM

    Look through this post and also the link to the switches diagram:
    https://www.askmehelpdesk.com/electr...180-24265.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire a Decora Combiniation 3 switch [ 1 Answers ]

I am having a serious brain freeze right now and need some help. We have a new addition (kids play room) that I have installed two sets of can lights and a ceiling fan. One set of lights has its own run, the other set has its own run and the ceiling fan has its own run. So I have 3 sets of wires...

How do I wire a switch with pilot light with 1 black, 1 white, and 1 ground wire? [ 1 Answers ]

I replaced an outdoor outlet controlled by an interior switch with a Cooper gfci outlet and it tested fine. Then I replaced the existing switch with a Cooper switch with pilot light. The switch has one line coming into it with one white(hot), one black(neutral), and one ground. When I connect...

Connecting two wires from light kit pull chain switch 2 wire to light kit for fan [ 6 Answers ]

I would like advise on how to attach the two black wires on the light kit pull chain switch to the light kit on the ceiling fan. I see there are two unattached wires on the light kit, one is black and the other is white. Are these the correct wires to attach the pull chain to? If so, how do I...

How to wire an additional light to an existing 3-way light switch [ 5 Answers ]

I am in the process of finishing my basement, and the light at the top of the stairs is connected to a light switch at the top and bottom of the stairwell. I would like to add another light to this configuration at the bottom of the stairs. From what I can see, the power runs into the light...

Levitron 3 Way Motion Sensor Wall Switch [ 2 Answers ]

I have power coming in from the basement to the first floor 3 way switch with a 4 way switch on the second floor and a 3 way on the top floor. The 3 way on the third floor appears to go to the lights. The 4 way has two wires going down as travelers to the first floor and two wires as teavelers to...

View more questions Search