 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whrilpool washer.everything else works accept water cycles
Whirlpool washer sensing w/triple spray technology...
First I would like to thank you for the time to read, any advice would be very appriated. Okay... in the middle of it washing and added clothing... then I turned the cycle back to the beginingso I could restart the wash over... nothing happened there is a delayed start with this dyer so I waited. Nothing. I then moved cycle to spin. Basically the washer only does spin cycle... I ck the circuit braker. Nothing. Unplugged.. Nothing... can you help me?? Thanks :) |
||||
Check out some similar questions!
My grams washer was leaving her clothes soaked so I went on the internet and someone told me It was off balance so we bought and replaced the ring balancer balancer gasket and the water pump. Well now after watching the machine I realized that the tub is not spinning at all or it will start to but...
My waher would leave my clothes soaked so we relpaced the water pump, ring-balencer, the center post gasket. Before we put that stuff on I know the tub would spin fast well now it only spins slow or it doesn't spin but it sounds like something is going on. Do you think we put something on wrong?...
Help! My kenmore washer won't fill with water during the wash cycle, but the rinse and spin cycle seems to be working fine. When I turn the knob to "wash" nothing happens. Even my handy man father was stumped on this one!! Can anyone help?
I have a Kenmore 90 model #110.20922990 top load washing machine. I have had no trouble until today. I finished a load as normal. Now the next load, the water will not enter the machine. The machine starts right into aggitation as if it had water. I am assuming it is the "water pressure switch"? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
