Ask Experts Questions for FREE Help !
Ask
    Iconokrass's Avatar
    Iconokrass Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2009, 08:37 PM
    Ritetemp Heater Thermostat Resetting Temp to 62
    My Ritetemp thermostat suddenly started randomly resetting the temperature to 62 degrees one day about a month ago. I can't figure out why or how to find where in its database (what days/times) it thinks should be at 62 degrees.

    When it first happened I noticed that the batteries were dying, so I replaced them. Other than that, I can't figure out what happened or what to do about it (I am a renter, not an owner.)
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 13, 2009, 08:52 PM
    Unless it is on a programed set back the thermostat might be defective.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blown Ritetemp 8050C thermostat [ 2 Answers ]

I have a 6 year old Trane heat pump air conditioning system and about 6 months ago added the Ritetemp 8050C thermostat. It worked flawlessly for 6 months then all of a sudden when I went to manually lower the temperature in cooling mode, the thermostat display and most of its functionality "blew"...

Ritetemp thermostat 6022 [ 0 Answers ]

I have a heat pump am attempting to hook up ritetemp 6022 thermostat the instructions are to hook g to g r to rh y to y w to o blue is not mentioned and these are the wires I have However when in the heating mode all workd good for heat but if I switch to cool it also works but when it...

TH8000 resetting themostat temp [ 4 Answers ]

I have a TH8000, a Heil DC90 furnace and an Amana heat pump. During the winter my daytime temp is 65 and at night I set it back to 55. Everything has worked fine for the last 18 months until the last couple of nights (which have been cold but not remarkable). What happens is that at some...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

Janitrol to ritetemp thermostat conversion [ 1 Answers ]

I am trying to install a ritetemp 8050C model thermostat to replace the Janitrol thermostat that came with my Goodman-Janitrol two-stage, heat pump system. There is an "E" terminal on the Janitrol unit (seven wires) but no corresponding terminal on the ritetemp unit(six wires). What is the...

View more questions Search