Check out some similar questions!

bugi · Nov 9, 2009, 04:05 PM

How to connect a alternator for a tractor

tkrussell · Nov 9, 2009, 05:48 PM

Mechanically or electrically?

bugi · Nov 10, 2009, 09:10 AM

Originally Posted by tkrussell

Mechanically or electrically?

Electrically

tkrussell · Nov 10, 2009, 01:53 PM

I was hoping you would elaborate. My mistake for not asking for more detail.

Ae you trying to add an alternator or replace one?

I think this may be better answered by someone over at Small Tools or Lawn Equipment, not here, where we typically answer questions about building wiring.

bugi · Nov 10, 2009, 03:10 PM

I want to replace a generator with an alternator to an old tractor and I need to
Hokup the wire of the alternator .Tank You
For the help.Bugi..

KISS · Nov 10, 2009, 03:57 PM

<I'll move it from E & L to tools and power equipment and retitled.> - KISS

I'm not sure if Cars and Trucks would be more appropriate, depands on the tractor, I guess. There are lawn tractors and farming tractors. Let's try here, if no response someone else who can, can move it.

KISS · Nov 10, 2009, 04:06 PM

See post #12, here: Chinese Tractor Owners Association - CTOA Forums - Tractor Troubleshooting - Voltage drop, I think?

crigby · Nov 10, 2009, 04:30 PM

Hi,
Nice link KISS! The one question unasked is this generator also your starter?
Peace,
Clarke

tkrussell · Nov 10, 2009, 05:17 PM

Thanks Kiss, yea Kiss knows all the back roads of the internet, down in the capillary veins, so to speak.

KISS · Nov 10, 2009, 06:23 PM

Thanks tk. I do have the habit of finding the obscure. Even if it's to prove a point.

tk: There's a few links in Electrical Engineering that could use some input.

To everyone:
The link in post 7: I don't like the fact that there is no place on the schematic for a fusible link/fuse between the output of the alternator and the battery. Something like 30-40 Amps, I suppose. Other than that, looks like a car problem.