Ask Experts Questions for FREE Help !
Ask
    hotpoint's Avatar
    hotpoint Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2009, 11:05 AM
    Replace detergent trip spring
    Have hotpoint hda3400f00bb; detergent round dispensor will not stay closed. I ordered spring. Could you give me simple instructions on how to replace spring. I assume I take out screws to get to back of dispensor
    Thanks

Check out some similar questions!

How do I replace press handle spring [ 1 Answers ]

I have a craftsman drill press model #113 21371. The spring that pulls the press handle seems to be broken. There is a decal on the hub that says to see the operators manual for instructions in replacing or adjusting this spring. I do not have the manual and wanted to know if one is available or...

How to replace iron cleanout in floor with flush PVC one I won't trip on? [ 2 Answers ]

Hi experts. There's an iron cleanout (4") in the floor of my favorite person's space that needs to go away. I'm thinking I can chip it out, cut it with a grinder, chip away at the concrete around it, put in a rubber connector, and install a new, flush-to-floor plastic cleanout. Is this the...

How to replace recoil spring on trimmer [ 1 Answers ]

I needed to replace start pully on a ryobi 700r trimmer and the recoil spring came undone and now I can't get it back in. any suggestions?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.