Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier 58VUA80 Pilot flame fired but main burner doesn't come.
[ 2 Answers ]
The furnace in my house (already installed in house before I bought) is a Carrier Weathermaker 58VUA80-101. Don't know if it's 9000 or what. When called for heat, (1) main blower turns; (2) Inducer motor turns; (3) Pilot flame fires; However main burner doesn't work. After many sparking it stops...
Tempstar NTG3100GFA1 Furnace No Pilot/No Flame/Blowing Cold Air
[ 1 Answers ]
I live in Minnesota and have a 10+-year-old Tempstar NTG3100GFA1 furnace. It uses natural gas and is a split system. It also has a vanEE air exchanger and in-line humidifier with a programmable Honeywell thermostat. 1 1/2 months ago the furnace stopped working - the blower was blowing cold air...
Pilot and main flame won't stay lit
[ 3 Answers ]
I have a Coleman propane furnace in a mobile home. Model MGHA-090ABPQ-05. When I light the pilot and close the door to the flame box, the pilot will go out. If I leave the door open, the pilot will stay lit. If you turn up the thermostat and the main flame lights, there is a strange almost...
Blue Flame-Pilot will not stay lit-Hot Water Heater
[ 7 Answers ]
My pilot light has a crisp blue flame when I light it and stays that color, but it will not stay lit. I have no problem lighting it, and then it takes off, but then it will go out after an hour or so. So, is this the thermocoupler?
Excessive Flame from Hot Water Heater Pilot Light
[ 2 Answers ]
Recently replaced thermocouple in hot water heater due to no pilot light. Upon installation, the pilot light burns with a much higher flame than before. What might cause this? View more questions Search
|