Ask Experts Questions for FREE Help !
Ask
    missiondc's Avatar
    missiondc Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2009, 09:41 AM
    Furnace will not lite
    The furnace in our building is a forced hot water system. We can't get our furnace burners to come on. What should we check?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 5, 2009, 11:39 AM
    Make sure power is getting to the boiler. Test with meter. Then make sure thermostat is turned up. If that fails call the landloard since it is his responsibility to repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace won't lite [ 2 Answers ]

I have a bryant furnace about 9 years old. I went to fire it up for the first time this year and it wouldn't light. The evacuation fan comes on and just stays on. I don't hear the gas relay click and the glow plug doesn't go on either. I cleaned and tested the flame sensor and still nothing...

Gas Furnace will not lite [ 6 Answers ]

I have a 20 year old Rheem Gas Furnace with a standing pilot light. When I lite the pilot this season, everything worked fine. Furnace Fired up and all was good. Replace the panel, and by the time I took A few steps from the furnace it shut down. Now it will not relite. I have Jumped the...

Lite my furnace [ 0 Answers ]

I do not know how to lite my furnace and my kids are cold. Can you please tell me how. Thank you:(:confused:

Can not get my furnace to lite [ 5 Answers ]

Can someone please help me? We have a honeywell furnace I am not sure of what model. But we ran out of fuel, which triggered the furnace to kick the reset button off. We have bleed the fuel line after we got our fuel delivery. I have followed all the directions on how to start the furnace back...

Gas Furnace Doesn't Lite [ 3 Answers ]

My Carrier Furnace Igniter glows but the valve won't turn the gas on. I have discovered that the relay switch on the top of the valve has a bad connection to the pins (2 each) on the two solenoids. I can loosen this and slide up and down several times and it will work for awhile. My problem is that...

View more questions Search