Ask Experts Questions for FREE Help !
Ask
    flworkingman's Avatar
    flworkingman Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 22, 2009, 04:15 PM
    Gator bites on iron pipes
    Has anyone ever used a gator bites fitting on iron pipes?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 22, 2009, 06:35 PM

    Just once. Won't try that again.
    flworkingman's Avatar
    flworkingman Posts: 2, Reputation: 1
    New Member
     
    #3

    Oct 22, 2009, 08:24 PM
    Thanks, I did it seems to be holding. First and last time.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #4

    Oct 22, 2009, 10:01 PM

    Iron pipe doesn't have smooth surface. The fitting won't have positive grip and will leak.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gator bites [ 5 Answers ]

On our boiler we are trying to change the copper pipes. Can we use gator bites elbow connectors where we connect the copper together? With the boiler heater water getting really hot, Will the gator bites work? Or can we use something else to connect these pipes without soldering? Please help. ...

Replacing iron pipes [ 2 Answers ]

I'm planning on updating the plumbing in my 1943 house. Some was done before I bought the house. There is pvc pipe installed under the house connecting the waste drains to the city system. However, the pvc ends just below the subfloor in the crawlspace, and I can see rusty iron going up into the...

Iron Heating Pipes [ 4 Answers ]

My house is about 38 yrs old and my hot water baseboard heating system was installed with iron pipes instead of copper. I was told by Doc Harrison a system like mine has very little fresh water added to it once in service, and the constant heating and cooling of the water drives most of the air...

Replacing cast iron pipes [ 3 Answers ]

I have an older home with cast iron pipes. I have to replace them due to stress cracks? How is this done and should I replace the cast iron with PVC?:confused:

Cast Iron Pipes [ 2 Answers ]

What is the best way to clear cast iron drain pipes as a step towards making future preventive maintenance cost effective and less labor intense? Is there a preferred cutter to use on a rooter machine that could accomplish this? Is there chemicals that are safe to use that can assist the process. I...


View more questions Search