Ask Experts Questions for FREE Help !
Ask
    meridith3345's Avatar
    meridith3345 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2009, 03:04 PM
    Where can I get a fan remote with 5 code switches?
    I have a ceiling fan/light fixture that only has an on/off wall switch and a lost remote. When the wall switch is on, both the fan and lights are on. So, I can't turn off the fan and keep the lights on or vice versa.

    I bought a universal remote that says "works on all fans." Well the remote has 4 code switches (the up down things) while the receiver in the fan has 5 code switches.

    I tried with all of them up and all of them down to see if maybe that would work. It didn't.

    The fan came with this house that was built in 2001. I can't figure out what kind of fan it is but I got this off the receiver part: 7063-09A 4/300 5+5/250 Nov 2001.

    Not sure if any of that helps, but really all I seem to need is a remote with 5 code switches. Anyone have any idea where to get one?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 19, 2009, 01:11 PM

    What make is the fan?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    meridith3345's Avatar
    meridith3345 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 19, 2009, 03:03 PM
    As I mentioned, I can't figure out the make/brand. It is not labeled anywhere. Does it matter though? All I need is a remote with 5 code switch things.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Oct 19, 2009, 05:37 PM

    Then you need to buy a replacement with both the remote and the receiver all in one kit. Try HD
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Nov 2, 2009, 10:35 PM

    The best place to get parts is the manufacturer.

    Otherwise I'd try CeilingFanParts.com Home and Ceiling Fans parts & repairs online
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wall Control Remote Wiring to Two Switches [ 2 Answers ]

I have a ceiling fan wall control that I'm trying to install into a wall outlet. The home is prewired for ceiling fan.. i.e. one switch for light, one switch for fan. The wall remote is a Minka Aire brand. There are 3 wires on the remote, two black wires, one marked "fan" and the other marked...

Controlling two separate switches (for fan) with one remote [ 2 Answers ]

I currently have a celing fan that is controlled from two separate switches on the wall: one for the fan, the other for the lighting. I'd like to be able to use a single remote control to control both. I've found remote control conversion kits, but it's made for a SINGLE switch setup. Is there...

Wiring a remote controlled fan to run from dual switches on wall [ 5 Answers ]

I bought a new remote controlled hampton bay mediterranian fan and want to be able to control the fan and lights from wall switches as well. How do I wire it to the switches to run each separately?

Remote dip switches [ 1 Answers ]

I have lost my remote for a hampton fan. I have a remote for another hampton fan. I am trying to get the remote working with the other fan. I have all 4 dip switches the same for remote and the sensor. They are both Hampton bay products. Unfortunaltly it is not working. Some minor...

How do I correctly wire a new ceiling fan (with a remote) when there are 2 switches? [ 9 Answers ]

I am trying to replace an old ceiling fan (that had a light) with a newer version that has a remote to control both the light and fan. The old fan was wired to work on 2 separate switches - one for the light (I'll call it switch #1) and one for the fan (switch #2). There is a third switch in the...

View more questions Search