 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman pressure washer
I have a craftsman model 580.762012 washer. It started losing pressure some of the time. I could stop and restart it and it worked most of the time. Now it will not pressure up at all.. I have cleaned the rig. Water will run through it but it will not pressure up at all now. Thanks for the help.
|
||||
|
||||
|
Hi, Could I ask a big favor of you. I just bought the same pressure washer with a cracked pump housing. Could you scan the pump parts list and send to me via an e mail attachment? I am sorry to bother you but Sears wants $18 for the manual! Thanks,
Ken [email protected] |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a used Craftsman 2100 PSI pressure washer that is acting up. I received this pressure washer from a relative who was having problems with it and just decided to buy a new pressure washer instead of messing with it and getting it fixed. The engine starts right up and runs good and smooth, I...
Does anybody know how to adjust the pressure regulator oin 2600psi troy bilt?
I have a 5 year old Craftsman pressure washer with a Honda gas engine Model Number 580.768350. When I start the machine up and press the nozzle it has great pressure but once I release the nozzle to do something else and go to press it again there is no longer any pressure. If I stop the machine...
I have used my washer twice and loved it. Now I go to use it and it runs fine, but no pressure. Is there anything I can do to correct this other than take it in for repair?
Hi, my washer started "leaking". The repair guy said was from too low water pressure or flow into that "cup" in the washer the water "jets" into (that "cup" is required by law for some reason). Anyway, I'm on a well. I have a water pressure of about 29 to 32 psi (it was higher I think... I'm going...
View more questions Search
|
