Remove bottom sprayer arm to clean trap

Check out some similar questions!

Whirlpool dishwasher sprayer arm does not spin, water in bottom! [ 3 Answers ]

We have a DU840 inherited in a foreclosed home that we bought. Turned it on and ran through a complete cycle. However, none of the dishes were cleaned even though the detergent dispenser opened. There was water in the bottom at the end of the cycle. Apparently, the sprayer arm did not spin...

Cannot remove sprayer line connection under kitchen sink [ 2 Answers ]

I tightened the packing nut from behind the shut off valve to fix that leaking issue... now the sprayer line is leaking from either from the nut or the collar that sits just below the nut.. I cannot tighten or loosen it to remove it. There is no space in there for a wrench to maneuver

Can't remove eschucheon from stem on bottom mount faucet [ 4 Answers ]

Please help. I have most of a bottom mounted faucet deinstalled but I can't figure out how to remove the handles to get to the eschucheon. I've tried pulling, unscrewing, there are no screws visible and it's all one piece. Since the faucet is old and doesn't work properly (I'm throwing it away) can...

Upstairs sink won't drain despite snacking and clean trap [ 2 Answers ]

My upstairs bathroom vanity sink is giving me problems. When it wouldn't drain, I took apart the trap (PVC accordion on sink end), cleaned it and the sink drain, and snaked in as far (not real far) as I could go into the drainpipe. After I reassembled everything, the sink was worse then before,...

P trap is stuck; can't remove! [ 3 Answers ]

My girlfriend dropped an earring down the drain. The P trap (or J bend, actually) should be easy to remove, but after twisting off the two nuts, the trap is still stuck to the pipe coming out of the wall. I guess the gunk that has accumulated over the years is gluing them together. Any tips on...

View more questions Search

Check out some similar questions!

Add your answer here.