 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need a substitute for broken Ideal Standard Ultra Valve, electronic temp controlled
Hi-
I have a 10-year old Ideal Standard Ultra Valve installed to fill a bathtub. It is a push-button faceplate with electronic controls on the bath valves to control the water temperature and fill the tub It is broken and the company that made it is out of business. When I bought it I was told it was also used to fill therapy tubs in institutions as the upper temp control meant no one could be scalded. Does anyone have any ideas on something I could install to replace this without ripping out the tub to engineer a replacement? Thanks! |
||||
|
|
|
||||
|
Did you ever find a source for your replacement parts
|
||||
|
|
|
||||
|
Go here http://www.moen-faucet-warehouse.com/search.asp and search for iodigital by Moen. It may be a suitable replacement. Yep, I know it's not exactly what you asked. I did locate ideal-standard company here: Global website search - Ideal Standard Not sure you have to rip out the tub. Usually access panels are used. If not, they can be added. What's the exact problem? Can you take pictures of the valve and post using go advanced/manage attachments We might be able to come up with ideas. Either put a ruler in the picture or measure overall dimensions. |
||||
|
|
|
||||
|
Hi,
I have the same problem essentially. Did you find a place that has replacement parts? Or indeed just a new substitute from a different company? Also, does anyone know how complicated it would be to just exchange the entire system to a regular shower valve? Thanks [email protected] |
||||
|
|
|
||||
|
Ultravalve
Hi,
I have a broken Memry Ultravalve electronic shower valve (which I understand is the same as "Ideal Standard Ultravalve") I need to replace. Any ideas on where I could get it fixed/buy a new one/ buy a similar one (especially in the miami area). Thank You |
||||
|
|
|
||||
|
Hi,
I also have a broken memry ultravalve and am looking to replace it. Did you ever get any information where they sell them? Thanks, Jim [email protected] |
||||
|
|
|
||||
|
|
||||
|
|
|
||||
|
|
||||
|
|
|
||||
|
The guy who can service the Ultravalve:
A E Ultravalve 4541 Helgesen Dr Madison, WI 53718-6747 (608) 223-1121 He fixed mine. |
||||
|
|
|
||||
|
The guy who can service the Ultravalve:
A E Ultravalve 4541 Helgesen Dr Madison, WI 53718-6747 (608) 223-1121 He fixed mine. |
||||
|
|
|
||||
|
|
||||
|
|
|
||||
|
Dithermaster - how long ago was it that you had your control valve fixed? I tried the number and it is no longer in service. Do you have a name and number of the person who did the actual repair? Did they mention what was wrong with it?
|
||||
|
|
|
||||
|
Dithermaster - how long ago was it that you had your control valve fixed? I tried the number and it is no longer in service. Do you have a name and number of the person who did the actual repair? Did they mention what was wrong with it? |
||||
|
|
|
||||
|
I am looking for the same, ae ultravalve in Wisconsin is apparently out of business. Have you found any alternative.
|
||||
|
|
|
||||
|
That's the last contact info I had, sorry. He fixed my valve a couple years ago.
My control panel went out a couple months ago, so I replaced it with a microcontroller and control panel of my own design since the valve itself was still good (and fairly new, just having been replaced a couple of years ago). It is surprising that there isn't really a reasonably priced alternative. ///d@ |
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
I have a single lever (actually a rotating knob) American Standard valve. It's stuck so that it doesn't allow any hot water (cold is fine) to pass. Last time this happened (that was about a year ago -- this particlar shower doesn't get used much), the plumber removed the face plate, took out a...
Replaced Amer Std "ultramix+ bath and shower cartridge" (051337-0070A.) Had lubed washers, reassembled with care & still leaking about 5-6 gallon per day, same as before, more drips when water is turned on and off in same plumbing run. THANKS!
Hi, I installed a american standard shower valve in my shower and I hooked up the hot and cold supply lines backwards. Is there and easy fix to this I really don't want to cut a hole in the back of my wall to fix this. Thanks Stancy
I Have an old American Standard one handle shower only valve (approx 40 yrs old). I bought a repair kit from a plumbing parts store consisting of valve seats, o-rings compresto install the repair kit?sion springs, etc. Can I gain access to the valve from the shower, or do I have to cut a hole in...
Repairman said that the Evaporator Fan Motor (also called it variable speed motor) was broken and needed to order a new one. I'm trying to get a quote for the part but can't find this terminology. What is it called? Also, the unit was installed in June 2005 - do you think the part is under...
View more questions Search
|
