Ask Experts Questions for FREE Help !
Ask
    Steel02's Avatar
    Steel02 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2009, 06:08 AM
    Kenmore Elite Catalyst Washer
    I just bought a used washer. Works fine except when draining the water out it leaks underneath the washer. What could it be?

Check out some similar questions!

Kenmore elite catalyst washer not spinning [ 1 Answers ]

Model number 11020072991 Ok, here's where I'm at. I believe it's the drive coupler? I've disconnected the control panel and fliped it back. I remove the brass colored springs holding on the cover and removed the cover after disconnecting the clamps and hoses needed. Now, I'm stuck and don't...

KENMORE Elite Catalyst Washer SM 9710768D [ 2 Answers ]

KENMORE ELITE CATALYST WASHER sm9710768D How old is my washer? Is it worth $150? It's heavy duty king size capacity. The machine rattles during spin cycle - maybe my floor isn't level? When I first press start it begins to fill only a little bit and then starts to agitate with very...

Kenmore Elite Catalyst Washer [ 1 Answers ]

My Kenmore Elite Catalyst Washer with digital display was not spinning. I replaced the coupler, the old one was worn. The washer did spin however it made a whinning noise. I ran several loads and now it will not spin again. Any suggestions on what the problem may be? Thanks.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.