Ask Experts Questions for FREE Help !
Ask
    realestpamela's Avatar
    realestpamela Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 19, 2008, 04:56 PM
    KENMORE Elite Catalyst Washer SM 9710768D
    KENMORE ELITE CATALYST WASHER sm9710768D



    How old is my washer? Is it worth $150? It's heavy duty king size capacity. The machine rattles during spin cycle - maybe my floor isn't level? When I first press start it begins to fill only a little bit and then starts to agitate with very little water. I don't know how to change that. I have no manual and probably wouldn't be able to decipher the contents anyway!
    Suggestions would be greatly appreciated:confused:
    Thank you, Pamela.
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Jul 19, 2008, 06:17 PM
    Hello Pamela

    It can be anything up to 2 years old, so yes it may be worth $ 150,00.

    First get a manual, as that is important to understand properly how the washer should be operated, and take it from there.

    For manuals : try any of the following Sears links :

    Sears on-line website

    http://www.sears.com/Service

    http://www.searspartsdirect.com/partsdirecta

    http://www.searspartsdirect.com/partsdirectb

    Success!
    As always : if you require more info, please let me know. If this solves your problem, please rate the answer provided! Feed back is always appreciated!

    ;)
    realestpamela's Avatar
    realestpamela Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 20, 2008, 08:42 AM
    Quote Originally Posted by realestpamela
    KENMORE ELITE CATALYST WASHER sm9710768D



    How old is my washer? Is it worth $150?? It's heavy duty king size capacity. The machine rattles during spin cycle - maybe my floor isn't level? When I first press start it begins to fill only a little bit and then starts to agitate with very little water. I don't know how to change that. I have no manual and probably wouldn't be able to decipher the contents anyway!
    Suggestions would be greatly appreciated:confused:
    thank you, Pamela.
    Hi, thank you so much for responding! I wasn't able to find a manual on the links you provided. I did email sears and asked if they had a manual and will let you know the outcome. Thank you again, pamela
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite catalyst washer not spinning [ 1 Answers ]

Model number 11020072991 Ok, here's where I'm at. I believe it's the drive coupler? I've disconnected the control panel and fliped it back. I remove the brass colored springs holding on the cover and removed the cover after disconnecting the clamps and hoses needed. Now, I'm stuck and don't...

Kenmore Elite Catalyst Washer [ 1 Answers ]

My Kenmore Elite Catalyst Washer with digital display was not spinning. I replaced the coupler, the old one was worn. The washer did spin however it made a whinning noise. I ran several loads and now it will not spin again. Any suggestions on what the problem may be? Thanks.

Kenmore Elite Catalyst Washer OL err Code [ 1 Answers ]

I have a Kenmore Elite Catalyst Washer that is reading the error code OL. I do not have model number. I bought the washer and dryer from a used vendor I have looked everywhere for the model #, I guess they might have scratched it off? If anyone has an error code list of this washer...

View more questions Search