Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a Honeywell RTH3100C thermostate
[ 1 Answers ]
I currently have a Honeywell RTH7000 series programmable thermostat. It broke so I bought a Honeywell RTH3100C non-programmable. I want to get some help in wiring it beforehand because I had problems wiring up the 7000. Current wiring w/ wire colors: blue - C green - G yellow - Y orange -...
Thermostate Wiring gone wrong
[ 2 Answers ]
I accidentally rippped the lettering off the wiring when taking off the dead thermostate. Anyway, I have only 2 wires coming out of the wall: White and Black. (I do not have an Air conditioner). What colour wire goes to the RH (heat power) and W (Heater control line)? Will I do damage to my...
Programmable thermostat wiring
[ 3 Answers ]
I have purchased a Hunter 44760 thermostat to replace my Bard mechanical thermostat (Honeywell LR1620). The Hunter thermostat has the following connections - R, Y1, W2, E, O, B, G, L, C. The Bard has the following connections - R, Y, W2, E, B, G, L, X1 - X2 (jumped together), and W3 (no wire to the...
Wiring a programmable thermostat
[ 2 Answers ]
I've purchased a Honeywell programmable thermostat for electric baseboard heat - model RLV430A. There are 2 black wires on the back of the new thermostat. The wiring instructions say "The thermostat wires are not polarized; either wire can be connected to the load or to the power supply". There...
Noma programmable thermostate
[ 1 Answers ]
Trying to install a new 52-2570-6 Heating /Cooling Thermostate.My old thermostate had 5 wires ,green,red,orange,white +black.My problem is I do not know where the black wire goes.On my old one it went to a terminal 4. View more questions Search
|